Cummins Ddrive engine Mseries 11 L 6 cylinders
From a series that is service-proven through millions of hours of operation in some of the
injection pressures, with redesigned overhead arrangement, pistons, crankshaft and camshaft.
A gear train with high contact ratio spur gears also eliminates unwanted thrust loads and reduces noise.
Cummins MTA11-G2 Diesel Engine for Generator Set
General data of Cummins MTA11-G2 Diesel Engine for Generator Set | |
Engine Model | Cummins MTA11-G2 |
Type | 6 Cylinder, In-line, 4 Stroke |
Displacement | 11 L |
Bore&Stroke | 125*147 mm |
Dry Weight(include flywheel and generator) | 940 KG |
Wet Weight(include flywheel and generator) | 980 KG |
Center of Gravity from Rear Face of Flywheel Housing | 450 mm |
Center of Gravity Above Crankshaft Centerline | 191 mm |
Performance Date of Cummins MTA11-G2 Diesel Engine for Generator Set | |
Rated Output/Speed | 257KW/1800RPM |
Standby Output/Speed | 283KW/1800RPM |
Brake Mean Effective/Rated Output | 1586 KPa |
Brake Mean Effective/Standby Output | 1742 KPa |
Fuel Consumption/Rated Output | 59 L/h |
Fuel Consumption/Standby output | 66 L/h |
Technical data of Cummins MTA11-G2 Diesel Engine for Generator Set | |
Aspiration | Turbocharged, Aftercooled |
Fuel System | PT Pump Direct Injection |
Engine Coolant Flow | 5 L/s |
Coolant Capacity, Engine Only | 12.9 L |
Oil Pan Capacity-High/Low | 34/30 L |
Idle speed | 675-750 RPM |
Minimum Engine Speed | 500 RPM |
Maximum Governed Speed | 1725 RPM |
Maximum Over Speed Capability | 1725 RPM |
Compression ratio | 16.1:1 |
Piston Speed | 8.8 m/sec |
Maximum Friction Power | 30.6 KW |
Firing Order | 1-5-3-6-2-4 |
The above is general technical specification of Cummins MTA11-G2 diesel engine for generator set. It is also for us to supply the Cummins MTA11-G2 genuine engine parts and Cummins diesel generator set of this engine.