Cummins Ddrive engine Mseries 11 L 6 cylinders
From a series that is service-proven through millions of hours of operation in some of the
injection pressures, with redesigned overhead arrangement, pistons, crankshaft and camshaft.
A gear train with high contact ratio spur gears also eliminates unwanted thrust loads and reduces noise.
Cummins MTA11-G2A Diesel Engine for Generator Set
General data of Cummins MTA11-G2A Diesel Engine for Generator Set | |
Engine Model | Cummins MTA11-G2A |
Type | 6 Cylinder, In-line, 4 Stroke |
Displacement | 11 L |
Bore&Stroke | 125*147 mm |
Dry Weight(include flywheel and generator) | 940 KG |
Wet Weight(include flywheel and generator) | 980 KG |
Center of Gravity from Rear Face of Flywheel Housing | 450 mm |
Center of Gravity Above Crankshaft Centerline | 191 mm |
Performance Date of Cummins MTA11-G2A Diesel Engine for Generator Set | |
Rated Output/Speed | 234KW/1500RPM |
Standby Output/Speed | 257KW/1500RPM |
Continuous Output/Speed | 175KW/1500RPM |
Fuel Consumption/Rated Output | 46.8 Kg/h |
Fuel Consumption/Standby output | 50.2 Kg/h |
Technical data of Cummins MTA11-G2A Diesel Engine for Generator Set | |
Aspiration | Turbocharged, Aftercooled |
Fuel System | PT Pump Direct Injection |
Engine Coolant Flow | 3.8 L/s |
Coolant Capacity, Engine Only | 12.9 L |
Oil Pan Capacity-High/Low | 34/26 L |
Idle speed | 675-750 RPM |
Minimum Engine Speed | 500 RPM |
Maximum Governed Speed | 1725 RPM |
Maximum Over Speed Capability | 1725 RPM |
Compression ratio | 16.1:1 |
Piston Speed | 7.4 m/sec |
Maximum Friction Power | 22.4 KW |
Firing Order | 1-5-3-6-2-4 |
The above is general technical specification of Cummins MTA11-G2A diesel engine for generator set. It is also for us to supply the Cummins MTA11-G2A genuine engine parts and Cummins diesel generator set of this engine.